Loading...
SkyBlade MiniProp 8 foot HVLS Ceiling Fan w/ Remote 5024 Sq Ft Coverage 230 Volt MP-0824-523-1
Highly Recommended Items:
| Quantity | Unit Price | You Save |
|---|---|---|
| 3-5 | 4% | |
| 6+ | 7% |
- LOW PRICE GUARANTEE
-
AUTHORIZED DEALER
-
EXPERT ADVICE
- bp-773-01||bp-773-02||bp-773-04||1002-2||1002-3||1002-4||1002-5
-
MADE IN USA
FREE SHIPPING*
AUTHORIZED DEALER
EXPERT ADVICE
MADE IN USA
NOTE: FANS ARE NON-STOCK ITEMS AND CANNOT BE RETURNED OR CANCELLED.
*Square Footage rating is for heat destratification only. A larger size fan may be needed to feel cooling effects at ground level. Please contact us for sizing recommendations based on your needs.*
Standard downrod is 6-1/2 Inches. Lengths up to 5ft are available.
SkyBlade's MiniProp HVLS ceiling fan is equipped with three extruded anodized, high performance E420 design aluminum airfoils. Contoured for maximum air movement, so environments become cooler faster. The wingtips are constructed of nylon 66, and can redirect outward airflow into downward airflow to improve and direct airflow downwards.
1/4" powder-coated steel and anodized aluminum resists rusting and corrosion even in cold and damp environments. Stainless steel safety brackets are included. The direct drive system allows this fan to operate incredibly quiet. Totally enclosed direct drive, IP65 rated ECM motor. Onboard VFD is factory assembled and programmed for minimum start/stop torque loads.
The Single Yoke Control includes a Forward/Reverse switch and 0-10 speed pot to control fan speed. A Single Yoke Control and 100 feet of 6-core shielded cable required for installation is included with each fan.
DESTRATIFICATION
Reduce energy costs up to 30% by minimizing the temperature differential from the ceiling to the floor
Eliminate hot/cold layers
Maintains comfort levels throughout building
Improved employee comfort
Noise produced when operating is close to that of an average library
Less run time on existing HVAC units
COOLING
Create constant airflow to reduce perceived temperatures by 10 to 15 degrees Fahrenheit
Maintains comfort levels throughout the building
More energy efficient than average small high speed fans with much higher air volumes
Minimizes humidity and condensation
- Model No.:
- MP -0824 -523 -1
- Voltage:
- 230
- Warehouse:
- Michigan
- Made In U.S.A.:
- Yes
- Type:
- Ceiling Fans
- Amps:
- 5.20
- Blade Material:
- Aluminum
- Blade Size (Inches):
- 96
- No. of Blades:
- 3
- Construction:
- Steel
- Decibels (dBA):
- <35 @ 20'
- Dimension Inches:
- Width: 96" Depth: 96" Height: 25"
- Hertz:
- 60
- Drive Type:
- Direct
- Horsepower:
- 1-7/20
- Limited Warranty:
- Motor: 5 Year Limited Electronic Controls: 1 Year Limited Airfoils and Hub: Lifetime
- Motor Type:
- TE
- Phase:
- 1
- Speed(s):
- Variable
- Weight lbs.:
- 105
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents:
WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERS
Ask a Question-
I have a warehouse space of 24.6 width by 60 length 16 ft ceiling height I was wondering what size ceiling fan I would need I was looking at the big big fans 6 8 10 feet pnes
You have approx. 1,500 sq. feet of floor area in your building. 1. Two HVLS ceiling fans rated for approx. 7,500 sq. feet each 2. Three HVLS ceiling fans rated for approx. 5,000 sq. feet each
![VPES Shutter Exhaust Fan 24 inch 2718 CFM Direct Drive VPES24, [product-type] - Industrial Fans Direct](http://www.industrialfansdirect.com/cdn/shop/products/VPES_Ind-OutESFan_03052e78-0178-4db0-b6bb-5006f10bfd18_200x.jpg?v=1610573132)
![VPES Shutter Exhaust Fan 12 inch 766 CFM Direct Drive VPES12, [product-type] - Industrial Fans Direct](http://www.industrialfansdirect.com/cdn/shop/products/VPES_Ind-OutESFan_200x.jpg?v=1571274516)
