Shutter Exhaust Fan w/ Cord & Plug 24 inch Variable Speed 5625 CFM 101316
Highly Recommended Items:
Quantity | Unit Price | You Save |
---|---|---|
6-9 | 3% | |
10+ | 5% |
All variable speed fans will run at a single speed unless used with a controller. Please see our control options here for a control that pairs with this fan.
The VES Environmental Solutions Exhaust Fan Series are an economical and versatile exhaust fan. The totally enclosed motor comes complete with built in speed switches and a 9´ cord. No electrician is required, just mount the fan in the wall and plug it into an approved receptacle. The corrosion resistant aluminum shutter comes complete with a tie bar to reduce shutter flapping and keep the shutters closed when the fan is not running. On the intake side of the fan the balanced aluminum blade is protected by a durable painted grill.
FEATURES
Totally assembled
No electrician required when plugged into an approved electrical outlet
9´ cord attached
Totally enclosed maintenance free motor
Corrosion resistant aluminum shutter with tie bar to reduce shutter flapping and opening on windy days
Safety powder-coated guard on intake side meets OSHA standards
Three wing aluminum balanced blade
2-year warranty on Motor and 1-year limited warranty on all other parts
Motor is CSA/CSA-US approved
ROUGH IN OPENING
24.5" square
- Model No.:
- 101316
- Voltage:
- 115
- Warehouse:
- Wisconsin
- Type:
- Exhaust Fans
- Amps:
- 4.94
- Blade Material:
- Aluminum
- Blade Size (Inches):
- 24
- No. of Blades:
- 3
- CFM Low:
- 1970
- CFM High:
- 5625
- Construction:
- Aluminum
- Decibels (dBA):
- 58 / 53
- Dimension Inches:
- Width: 26" Depth: 16" Height: 26"
- Hertz:
- 60
- Drive Type:
- Direct
- Horsepower:
- 1/2
- Limited Warranty:
- 2 Year on Motor / 1 Year Limited on Fan
- Motor Type:
- Totally Enclosed
- RPM High:
- 1725
- Phase:
- 1
- Speed(s):
- Variable
- Weight lbs.:
- 29
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents: WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERS
Ask a Question-
It says flapping and opening on windy days what do you recommend to not have that happen or is there a different type of fan
We would suggest purchasing an all weather hood for this unit: All Weather Hood
-
Can you use a temperature control switch for this model
Thank you for your question. Yes, the thermostat linked below would work great with this fan:
https://www.industrialfansdirect.com/collections/controls/products/vc012-c -
What is the flange depth. if I wall mount it, (24" fan) flush inside on a piece of 3/4" plywood, how much will stick outside?
The shutter box depth, or the portion that passes through the wall is 2" deep for this unit.
-
The Installations instructions do not address the optional vairable speed controller. I assume I run a wire from my breaker to a switch box to install the variable speed controller at ground level. Then I run wire from there to an outlet box to plug the fan into. Can I hard wire direct to the fan to avoid the need for an outlet box? will that void the warranty? Does the speed controller have an off position or do I need a seperate on-off switch?
Yes. You can hardwire directly to fan. This will void the warranty since you will need to cut the plug / cord on the fan.
Yes. The control can be turned to an Off position. -
How are the speeds changed on the SFV24C fan? It has a cord so I assume there might be a switch on the fan motor? If not, how much noisier will a speed control add to the decibel of the fan?
This fan is to be used in conjunction with a variable speed control that is not included, but can be purchased separately as a Highly Recommended Item on the fan product page.