Skip to main content

SkyBlade Hazardous Location HVLS Ceiling Fan 20 foot w/ Remote 31400 Sq Ft Coverage 115 Volt EXP-2061-512-1

Model:
EXP-2061-512-1
Brand:
SkyBlade Fans
Build Time:
10 to 15 Business Days ?
Ships By:
Freight

Build Time

The product Build Time you see represented on this site is only a typical number of days the manufacturer states it needs to build the product(s) when ordered. Build times are based on business days (excludes weekends & holidays).

The build time does not include the time it will take to ship the order to you (the customer). If an order has multiple items and comes from multiple warehouses, you may receive part of your order on one day, and then receive the remaining part(s) of your order at a later date.

*Please be aware that seasonal demand of certain equipment may cause build times to run longer than what is typical.

Highly Recommended Items:

Only $6,695.00

NOTE: FANS ARE NON-STOCK ITEMS AND CANNOT BE RETURNED OR CANCELLED.

*Square Footage rating is for heat destratification only. A larger size fan may be needed to feel cooling effects at ground level. Please contact us for sizing recommendations based on your needs.* 

Controllers must be mounted in a non-hazardous environment

BLADES

Equipped with 5 blades of precision 6005-T5 extruded aluminum alloy.

High performance STOL design

GEARBOX

Precision finished gears for low noise & long service life

Sealed with lifetime synthetic oil

Robust 3” output shaft for strength

Nylon bushing on input

CONSTRUCTION

Mounting is to be 1/4” powder coated steel

All construction is to be protected from the elements

Powder-coated steel hub plate & cylinder

Stainless steel safety brackets

Installed Weight: 236 Lbs

VFD

NEMA1, IP 10 metal enclosure with hinged door. (NEMA 4x, IP 66 available)

Factory assembled & programmed

Minimum start/stop torque loads

Single Yoke Control. Includes Fwd/Off/Rev switch and 0-10 speed pot to control fan speed. 100 Ft., 6-core shielded cable. One included with each fan ordered.

MOTOR

Totally Enclosed Fan Cooled (TEFC)

Explosion Proof*

Division 1 - Class 1 C & D

Division 1 - Class 2 F & G

Class F insulation

1.0HP (0.75 kW) nominal horsepower

APPROVALS

ETL

CE

C-Tick

STANDARD LIMITED WARRANTY

1 year: Motor & Reducer

1 year: Electronics

10 years: Blades

* The product is Hazardous Location. Only the motor is Explosion proof.

IMPORTANT: Touch-N-Go controller is not Explosion Proof. Must be installed outside of hazardous area.

Model No.:
EXP -2061 -512 -1
Voltage:
115
Warehouse:
Michigan
Made In U.S.A.:
Yes
Type:
Ceiling Fans
Amps:
3.4
Blade Material:
Aluminum
Blade Size (Inches):
240
No. of Blades:
5
Construction:
Steel
Decibels (dBA):
<55 @ 20'
Dimension Inches:
Width: 240" Depth: 240" Height: 25"
Hertz:
60
Drive Type:
Direct
Horsepower:
1
Kilowatts:
.75
Limited Warranty:
Motor, Reducer & Electronics: 1 Year Limited
Blades: 10 Year Limited
Motor Type:
Explosion Proof
RPM High:
55
Phase:
1
Speed(s):
Variable
Notice: Manufacturer's products features and specifications are subject to change without notice.
California Residents: warning WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question