Shutter Mounted Wall Exhaust Fans 8 Inch w/ 9' Cord & Plug 300 CFM Var

All variable speed fans will run at a single speed unless used with a controller. Please see our control options here for a control that pairs with this fan.

Shutter Mounted Exhaust Fan is perfect for removing excess heat, moisture, dust and odors from virtually any residential or commercial space. Applications include: workshops, welding rooms, restaurants, factories, warehouses, barns, and greenhouses. This wall mounted exhaust fan features aluminum blades, OSHA compliant wire guards, and automatic gravity shutters that open and close in conjunction with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. This fan comes fully assembled and ready to install out of the box.

FEATURES
High efficiency, quiet operating
Variable speed capable models for use with variable speed controls Note: control not included with fan, please see highly recommended items for a compatible control
Sizes 8” - 24” pre-wired with 9ft grounded cord—115v
Guards feature industrial gray polyester powder coating, OSHA spacing
“Rounded” guard design prevents excessive vibration, adds rigidity
Heavy duty aluminum shutters with reinforced corners
Weather stripping on louvers provide maximum seal, prevents rattling
Motor Type: TEAO, IP55 rating
Fans are UL705 certified

DIMENSIONS
11"W x 8"D x 11"H

ROUGH IN OPENING
8.5” x 8.5”

Model No.:: 8SF4V30C

Voltage:: 115

Warehouse:: Alabama

Type:: Exhaust Fans

Amps:: 0.6

Blade Material:: Aluminum

Blade Size (Inches):: 8

CFM High:: 300

Decibels (dBA):: 5.37 sones @ 10'

Dimension Inches:: Width: 11" Depth: 8" Height: 11"

Hertz:: 60

Drive Type:: Direct

Horsepower:: 1/25

Limited Warranty:: 2 Year Limited

Motor Type:: Totally Enclosed

Phase:: 1

Speed(s):: Variable

Weight lbs.:: 17

Notice: Manufacturer's products features and specifications are subject to change without notice.

California Residents: warning

WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.

Warranty

Dimensional Drawing

QUESTIONS & ANSWERS

Ask a Question

I'm looking for an exhaust fan to remove heat from my home garage. 20'x24' is this the correct size for that application Thank you

Thank you for your question. Based on the size of your garage, you will need a larger unit that moves about 600-800 CFM to turn the air over every 5-7 minutes. This unit is a great option. It is rated at 800 CFM, but is variable speed so can be turned down if desired - https://www.industrialfansdirect.com/products/ves-shutter-exhaust-fan-12-inch-800-cfm-variable-speed-ves12-j-d-manufacturing

This is also a good option, and has a plug in cord and integrated speed switch for easy installation - https://www.industrialfansdirect.com/products/vpes-outdoor-rated-shutter-exhaust-fan-w-cord-12-inch-1100-cfm-3-speed-vpes12-j-d-manufacturing
What is the cutout dimension for this fan?

Rough-in dimensions for this fan is 8.5" x 8.5"
I think this fan will be a good fit for my application. 6’x8’ compressor/dust collector enclosure attached to back of shop. 8’ walls. I have t111 siding / 16 on center 2x4 walls / 1/2” drywall. I’m currently running wire (drywall not installed yet). Do you recommend a height placement for this fan? It will have an 8’ ceiling and insulated. I’m trying to figure out where to place outlet for this. It sounds like it’s a 9’ cord but the closer the better. Does this get fastened to the siding only? I wasn’t sure if it would need blocking on inside seeing it will fit between studs. And do you sell a thermostat for this? I didn’t see a manual for this so if that is available please let me know. Thanks

This fan is meant to mount from the inside of your building. The flange has mounting holes. Here is a thermostat that will work wit this unit: VC012-C
there is a 9 foot cord that you plug in right, not shown in picture

That is correct. There is a 9' cord and plug included.
The demensions listed are 11" x 11" is that to the outside of the mounting flange?

Yes. That is correct. This is the total outside dimensions.
is there a detailed specifications document, ex. dimensions etc..?

No. Detailed specifications will be added to these fans in the near future.
can this be used with a thermostat

Yes. A thermostat can be used with most any fan since it is really only an On / Off switch based on the temperature.

Shutter Mounted Wall Exhaust Fans 8 Inch w/ 9' Cord & Plug 300 CFM Variable Speed 8SF4V30C

Build Time

Highly Recommended Items:

QUESTIONS & ANSWERS

Shutter Mounted Wall Exhaust Fans 8 Inch w/ 9' Cord & Plug 300 CFM Variable Speed 8SF4V30C

Build Time

Highly Recommended Items:

QUESTIONS & ANSWERS

Similar Products To Consider