Ruffneck AH Tandem Heat-Exchanger Heater 1-pass, 1” extruded finned tubing @ 5 fins/inch (.135” tubewall thickness) Choose Options AH-24B-C1
NOTE: THIS ITEM IS MADE TO ORDER AND NOT RETURNABLE.
Ruffneck AH Series Advanced Horizontal Unit Heaters are designed for rugged industrial applications and can be used with a variety of heat transfer fluids such as steam, circulating hot water, and glycol heating systems or in liquid cooling applications, including flash stream condensers, lube oil coolers, pump seal coolers and more. Explosion-proof models suitable for hazardous locations are also available on custom order.
FEATURES
Three blade aluminum, steel spider and hub with 5/8" bore
Two piece design with close wire spacing. 3/8" diameter probe will not enter. Epoxy coated to match cabinet color
9/16" diameter holes, two at top and two at bottom of heater
CSA and/or UL listed 1725 RPM permanently lubricated ball bearing type with rigid base. Explosion-proof or general purpose construction. All 50 and 60 hertz, standard voltages available
Anodized extruded aluminum
Max. Operating Pressure: 450 psi. (Refer to Owner’s Manual under Downloads tab)
Max Operating Temperature: 650˚F
5/8" outside diameter (16 gauge, 0.065" wall thickness) carbon steel tubes. Tension wound aluminum fins @ 10 fins per inch
- Model No.:
- AH -24B -C1A1 -A1 -1A
- Voltage:
- 115 / 208 / 230 / 460
- Warehouse:
- Various Warehouses
- Type:
- Heaters
- CFM High:
- 6690
- Construction:
- Steel
- Dimension Inches:
- Width: 59-1/2" Depth: 24-1/5" Height: 36-8/9"
- Hertz:
- 60
- Horsepower:
- (2) 1/2
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- (2) TE
- RPM High:
- 1725
- Phase:
- 1 or 3
- Weight lbs.:
- 470
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents: WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.