SD Exhaust Fan w/ Shutters 1 Speed 18 inch 3200 CFM Direct Drive S18-F1
Canarm/LFI’s standard fans follow a tradition of quality in design, materials and construction. All our standard fans are developed to be efficient and economically priced. Fans are now available with EC motors allowing you to save up to 70% on energy costs.
FEATURESSD18 - 4 Louvers
Single, two and variable speed models are available
All fans use a totally enclosed, thermally protected motor
Rugged steel welded box housing has a durable powder coated finish
Aluminum louver shutters are supported by long life nylon bushings (30”, 36”, 42” & 48” have PVC louvers)
12” - 24” models have heavy wire chrome plated OSHA guards on intake side of fan
12" - 24" models now upgraded with tie bar shutters and magnets for quieter operation and superior seal
30”, 36”, 42” & 48” models have grey powder coated guards
All fans are shipped completely assembled
- Model No.:
- S18 -F1
- Voltage:
- 115
- Warehouse:
- New York
- Type:
- Exhaust Fans
- Amps:
- 4.1
- Blade Material:
- Heavy-Gauge Aluminum
- Blade Size (Inches):
- 18
- No. of Blades:
- 3
- CFM High:
- 3200
- Decibels (dBA):
- 73 @ 5ft
- Dimension Inches:
- Width: 23.25" Depth: 18" Height: 23.25"
- Hertz:
- 60
- Drive Type:
- Direct
- Horsepower:
- 1/3
- Limited Warranty:
- 1 Year Limited
- Motor Type:
- TE
- RPM High:
- 1625
- Phase:
- 1
- Speed(s):
- 1
- Weight lbs.:
- 37
-
Notice: Manufacturer's products features and specifications are subject to change without notice.
-
California Residents: WARNING- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
QUESTIONS & ANSWERS
Ask a Question-
What is the static pressur of the fan ? 0.25 "WG ou lower ?
Thank you for your question. The static pressure is the amount of restriction the air has when going through the fan. The higher the static pressure, the lower the effective CFM the fan can move.
-
I have 10 of these fans and just ordered 2 more, I am wondering if you sell parts for this model S18-F1 I am looking for a new fan blade and a spare motor. Thank you
Yes, we do have the blade and motor for this unit. You will need to call 866.727.1060 to place the order, since these parts are not avaialable online.
-
What is the maximum operating temperature of this fan?
This fan, like many other fans, has an ambient temperature rating of 104 degrees F.
-
What type of fan would you recommend for a 90'x30' greenhouse? Thank you, Karoly
Since there are others questions we would have, please contact one of our knowledgeable sales team members at 866.727.1060
-
i just received this 1 speed Cananm fan and it is installed and working fine. But the directions seemed to indicate that I could put in a 2 step switch and have a high and low. The installer thought that was possible too. I would like to know if that is the case.
The instructions most likely cover all of the S and SD series fans. This particular fan uses a 1 speed motor On / Off. A 2 speed or variable speed controller should not be used with this fan.
-
I am about to order this Canarm single speed wall fan from you. It seems like it is one of the better built units, but is there something else you would recommend. I have a hot 3 car garage and a single speed is fine for application. Is there a simple on/off switch on the motor to turn it on and off, manual does not say. If not can a heavy duty power cord be attached to wiring instead of hard wire because I have a outlet above it in ceiling.
The S18-F1 is a very high quality fan. This fan does not come with an On / Off switch built in, since it is designed to be hard-wired to a switch. Yes, you or an electrical contractor can wire a 115 volt cord / plug to the fan.