Automatic Variable Speed Control Moisture Resistant 10 Full Load Amps Phason MTC-4C

The Modulating Temperature Control (MTC-4C) allows you to automatically control ventilation fans according to the ambient temperature. When the temperature is at the temperature set point, the MTC-4C operates the fans at the idle speed setting. When the temperature exceeds the set point, the MTC-4C increases the speed. When the temperature increases 6°F above the set point, the MTC-4C increases the speed to maximum. When the temperature drops below the set point, the MTC-4C shuts off the fans (in shut-off mode) or operates the fans at the idle speed (idle mode). The MTC-4C is ideal for poultry, livestock, greenhouse, or light-industrial buildings.

FEATURES
The control will automatically vary the speed of the fan to hold the set temperature
One variable stage (10 A general-purpose (resistive) load at 120/230VAC, 7 FLA at 120/230VAC, PSC motor) One-foot temperature probe, extendable to 500 feet
Two control knobs, one for set temperature, one for adjusting the minimum speed.
Continues to run at minimum speed or change the internal shunt to have the fan turn off at minimum speed setting
2°F off set-back for auto shut off
6°F temperature differential
Rugged enclosure (corrosion resistant, water resistant, and fire retardant)
115 or 230V AC operation
Adjustable 40 - 90°F temperature set point
Overload protection fuse (15A, 250V AC)
Two Year Limited Warranty

• User Manual
• Spec Sheeet